D1XN optical switch

Quick Inquiry

Details

D1XN optical switch
Features
Very small size, single body can reach dual 1X32 ports
Customized original imported motor
Combination of various control methods
(TTL+RS232,TTL+RS485,USB)
Low insertion loss, high return loss, high reliability

Application
Optical sensing multi-point dynamic monitoring system
Optical test system
LAN multi-source/detector automatic switching

Parameters Table

index		OSW-D1×N(N≤32)
Insertion loss	dB	Typ:0.3，Max:0.8
Fiber Type		Single mode, multimode, polarization maintaining
Working wavelength	nm	850&1310 or 1260-1650
return loss	dB	Single mode ≥ 55, multi-mode ≥ 40
crosstalk	dB	≥-80
Polarization dependent loss	dB	≤0.10
wavelength dependent loss	dB	≤0.25
temperature dependent losses	dB	≤0.30
repeatability	dB	≤±0.05
life	次	3*107
Can carry optical power	mW	≤1000
switching time	ms	≤10 (Adjacent port switching)
Operating temperature	C	-20~+70
stored temperature	C	-40~+85
Working voltage and current	V/A	+5 /1
Package size	mm	135X40X32
control method		TTL+RS232 or TTL+RS485 or USB
Fiber length	m	<1.5
Connector		Various lengths available

D1XN (N ≤ 32）

2-D1XN (N ≤ 32)

internal principle

pin

pin number	Types of	name	Function
1	Input	/RESET	For TTL, reset low to channel 0. A high level means that the channel select bit is active.
2	Input	D0	TTL, D0 is low, D4 is high, for example: 00000b=1 CH; 11111b=32 CH.
3	Input	D1
4	Input	D2
5	Input	D3
6	Input	D4
7	Out	/READY	TTL, Standby (High=Not ready, Low=Ready)
8	Out	ERROR	TTL, error (high=Error, low=No error)
9	Power in	GND	ground
10	Power in	5V	5.0±5% V DC power supply (max 1000mA)
11	S-	RS232	RX
12	S+	RS232	TX

Model: COC-OSW-D1×N-A-B-C-D-E-F-G

port

Fiber Type

Working wavelength

Pigtail Type

Pigtail length

Connector

way to control

Outline Package

1 ~ 32

SM: SM, 9/125

M5: MM50/125

M6: MM62.5/125

850: 850nm

1310: 1310nm

1550: 1550nm

13/15:1310/1550nm

25:250um90: 900um

20: 2.0mm

FA:fiber array

05: 50±5cm

10: 100±5cm

15: 150±5cm

OO:None

FP: FC/PC

FA: FC/APC

SP: SC/PC

SA: SC/APC

LP: LC/PC

LA: LC/APC

ST:ST/PC

01: TTL+RS232

02:TTL+RS485

03:USB

A:135X40X32mm

B:135X64X32mm

Control instruction
Notice:
1. "_" means underscore.
2. All letters of communication commands are uppercase.
3. The module can only execute one instruction at a time. You need to wait for the program to return the corresponding value before entering the next instruction.
4. The complete command includes angle brackets "<" as the start character and ">" as the end character.

Program control instruction list
instruction	describe
<OSWXX_VERSION_?>	Read device version information Version information includes: hardware version information, software version information, and version time Version information format <OSWXX_HW[VNN.NN]_HDATE[XXXX.XX.XX]_SW[VNN.NN]_SDATE[XXXX.XX.XX]> example： TX:<OSW01_VERSION_?> RX:<OSW01_HW[V01.00.00]_HDATE[2017.02.01]_SW[V01.00.00]_SDATE[2017.02.21]>
<OSWXX_PN_?>	Read device model information Device model information format <OSWXX_PN_XXXX-XX-XX-XX-XX-XX-XX-XXX> Note: 1XN optical switch：1X16 Fiber Type：SM/M1/M5/M6 Fiber wavelength：40-60/85-13/13-15/15-16 Type of protective tube：20/30/90 Fiber length：05/10/15 Optical connector：OO/FP/FA/SP/SA/LP/LA/ST digital interface：01(TTL+RS232)/02(TTL+RS485)/03(USB) Shell size: A(135X40X32)/B(135X64X32) example：TX:<OSW01_PN_?> RX:<OSW01_PN_1X16-M6-13-15-90-15-FA-01A>
<OSWXX_SN_?>	Read device serial number information Information Format of Device Serial Number <OSW01_SN_YYMMXXXXXXXX> Note: Production time (month and year) + 8-digit device code example：TX:<OSW01_SN_?> RX:<OSW01_SN_170701003001>
<OSWXX_ID_?>	Read device information
<OSWXX_OUT_?>	Read the current output channel example：TX:<OSW01_OUT_?> RX:<OSW01_OUT_05> Note: Return to the current output channel 05
<OSWXX_OUT_YY>	Set the current output channel example：TX:<OSW01_OUT_31> RX:<OSW01_OUT_OK> Note: The power-on reset of the device is 00.
<OSW_ADD_?>	Query the current address number of the device example：TX:<OSW_ADD_?> RX:<OSW01_OK> Note: Returns the address number 01 of the current device
<OSWXX_ADD_YY>	Set device address number example：TX:<OSW01_ADD_03> RX:<OSW03_OK> Note: The device address number 01 is changed to 03. After the return setting is successful, the current address number of the device is changed and stored.

D1XN optical switch

D1XN optical switch

Quick Inquiry

Related Products

Recommend Read

Related Links