Mechanical Optical switch standard - People's Republic of China

光开关国家标准  optical switch 
1×2 Optical Switch

Mechanical Optical Switch

standard - People's Republic of China

Features·Low Insertion Loss
·Wide Wavelength Range
·Low Crosstalk
·High Stability, High Reliability                                                                                                            
·Epoxy-free on Optical Path
·Latching and Non-latching
 

• Applications

·Metropolitan Area Network
·R&D in Laboratory
·System Monitoring
·Configurable OADM

Mechanical Optical Switch

standard - People's Republic of China

• Specifications

Parameters	Unit	OSW-1×2
Wavelength Range	nm	650~1310	1260 ~ 1670
Testing Wavelength	nm	850/ 1310	1310 / 1550
Insertion Loss	dB	Typ: 0.5   Max: 0.8
Return Loss	dB	MM ≥30   SM ≥ 50
Crosstalk	dB	MM ≥ 35   SM ≥55
PDL	dB	≤0.05
WDL	dB	≤0.25
TDL	dB	≤0.25
Repeatability	dB	≤±0.02
Power supply	v	3.0 or 5.0
Lifetime	Cycle	≥107
Switch Time	ms	≤8
Transmission Power	mW	≤500
Operation Temperature	℃	-40～+85
Storage Temperature	℃	-40～+85
Weight	g	16
Dimension	mm	(L)27×(W)12.6×(H)8.5(±0.2)

• Route States

         

  
 

• Pins

Optical  Path		Electric Drive				Status Sensor
1x2		1	5	6	10	3 - 4，7 - 8	2 - 3，8 - 9
Latching	P1-P2	N/A	N/A	GND	+5V	Open	Close
	P1-P3	+5V	GND	N/A	N/A	Close	Open
Non -latching	P1-P2	N/A	N/A	N/A	N/A	Open	Close
	P1-P3	+5V	N/A	N/A	GND	Close	Open

• Electrical Parameters

Parameters	Voltage	current	Resistor
5V     Latching	4.5~5.5	36~44mA	125Ω
5V   Non-Latching	4.5~5.5	26~32mA	175Ω
3V     Latching	2.7~3.3	54~66mA	50Ω
3V   Non-Latching	2.7~3.3	39~47mA	70Ω

• Dimension 

 

• Ordering Information: OSW－1×2－A－B－C－D－E－F－G

A	B	C	D	E	F	G
Mode	Wavelength	Voltage	Control Model	Fiber Diameter	Fiber Length	Connector
SM:9/125um M5: 50/125um M6: 62.5/125um	85: 850nm 13: 1310nm 14: 1490nm 15: 1550nm 162: 1625nm 165: 1650nm 13/15:1310/1550nm	3: 3V 5: 5V	L: Latching N:Non-Latching	25:250um 90:900um	05:0.5m 10:1.0m 15:1.5m	OO:None FP: FC/PC FA: FC/APC SP: SC/PC SA: SC/APC LP: LC/PC LA: LC/APC