MEMS 16X16 Optical Switch Module

Wavelength:

400~800nm、850~1310nm、1260~1670nm

Application Area:

Fiber monitoring
Data center
Fiber sensing

Product Features:

Compact size
High repeatability and stability
TTL with I2CControl Interface
Meets GR-1073 and GR-1221 standards

Download Contact Us

Product Details

MEMS 16x16 Switch Matrix

MEMS MXN optical switch matrix bases on MEMS technology, It allows channel selection between M single input fiber and N output fibers.

Features

n Compact size

n High repeatability and stability

n TTL with I2CControl Interface

n Meets GR-1073 and GR-1221 standards

Applications

n Fiber monitoring

n Data center

n Fiber sensing

Specifications ：

Parameters	Unit	Value
Channel Number	CH	16×16
Operating Wavelength	nm	1310±40 or 1550±40 or 1625±30; 850 /1310±40
Insertion Loss(Max)^{1 3 4}	dB	(Typ.) 1.2 , (Max.) 2.5
Return Loss	dB	SM≥50;MM≥35
Repeatability²	dB	0.05dB Max
Crosstalk	dB	SM≥50;MM≥35
PDL	dB	≤0.15
WDL	dB	≤0.3@CWL±20nm,23℃
TDL	dB	<0.4dB
Operating Temperature	℃	-5~+70
Storage Temperature	℃	-40~+85
Switching Time	ms	≤10
Operating Voltage	V	5
Note:1.IL is measured at CWL, 23℃. 2.Repeatability is defined after 100 cycles. 3.Excluding connector, the insertion loss of connector is increased by 0.2dB 4. IL tested value above based on single CWL±20nm, it would be 0.3dB if it tested at dual CWL±20nm.

Dimension ：

MODULE TYPE 6 - ELECTRIONIC PIN DEFINITION

*PHB-26P**
No.			Note
1	-
2	RS232_TX	TX	RS232
3	RS232_RX	RX	RS232
4	-
5	GND	-	Power DC5V/1.5A
6	GND	-
7	VCC	+
8	VCC	+
9	VCC	+

Optical Route ：

MxN switch matrix is combined by 16 pieces of 1x16 MEMS switch as input ports and 16 pieces of 1x16 MEMS switch as output ports，When a specific voltage is applied to the input optical switch and the output optical switch, any input channel can be connected with any output channel. The specific optical path switching principle is shown in the figure as below,

Order Information: MSW-M×N-A-B-C-D-E-F-G (MSW: MEMS Optical Switch)

ＭＸＮ

Port

Mode

Wavelength

Fiber Diameter

Fiber Length

Connector

Interface

Control mode

Ｍ：2~256

Ｎ：2~256

SM:9/125um

M5:50/125um

M6:62.5/125um

M10:105/125um

PM:PM Fiber

85:850nm

13: 1310nm

14: 1490nm

15: 1550nm

25:250um

90:900um

05:0.5m

10:1.0m

12:1.2m

OO:None

FP: FC/PC

FA: FC/APC

SP: SC/PC

SA: SC/APC

LP: LC/PC

LA: LC/APC

MPO

M1:PCB

M2:39*24*13.5

M3:90*55*12

M4:100*100*12

M5:110*141*12

M6:300*250*40

R2:TTL/RS232

R4:TTL/RS485

I2:TTL/I²C

US:USB

Note:

1. Above specifications just show the typical performance of Module.

2. Please contact our sales to discuss your specific requirements.

Prev： MEMS 32X32 Optical Switch Module Next： MEMS 8X8 Optical Switch Module